Power: ¾ HPc* motor provides power to operate almost any residential garage door. Please see your Genie® Professional Dealer for information on choosing the opener that is right for your door.
Quiet operation: The DC motor allows for quiet, smooth operation and soft start and soft stop.
Faster installation: Pre-assembled rail is ready to install. The lightweight power head allows for one person installation. We recommend installation by a professional dealer.
Two-Bulb Lighting System: Two 100 Watt bulb lighting system provides added convenience and safety.
SmartSet™ programming: Push button programming makes set up fast and easy.
Auto Seek Dual Frequency: System will automatically seek either the 315 or 390 MHz frequency produced by a remote, helping to ensure the opener will respond regardless of nearby frequency interference.
GenieSense™ Monitoring and Diagnostic Technology: Delivers the power needed at every movement of the garage door and continuously monitors the operation of the door, stopping operation when significant changes occur. GenieSense™ minimizes noise, wear and tear on the door, and improves overall safety.
Safety: Comprehensive Safe-T-Beam® system meets or exceeds all UL, state, federal and CSA regulations, and incorporates an auto reversing system and diagnostics.
Please contact us for complete details on our Genie Pro line of Garage Door Openers.
Town & Country Glass & Door Pro 1735 W State Road 28
Frankfort, IN 46041-9147
765-654-4923 / 765-659-1210
Toll Free: 800-894-4923
Fax: 765-659-0506.
Genie Pro Garage Door Opener Accessories
Wireless Keypad
(For Intellicode Products Only)
Description: Wireless Keypad Entry System with Intellicode
Optional Cover Available:
Brown (35365R), Almond (35365S), Sandstone (35365T)
Model: GWKP
Product Code: 35282R
|
What is Intellicode? |
|
Here's how it works: Conventional garage door openers are coded to send out the same fixed code time after time. A rolling code system uses a proprietary coding system that selects a new code from 4.3 billion possible combinations each time the system is activated. |
Wireless Keypad
(For Non-Intellicode Products Only)
Description: Wireless Keypad Entry System
Model: GWKBL
Product Code: 34961R
(For Intellicode Products Only)
Description: 3-Function Wall Console with Intellicode and Non-Intellicode models
Model: GPWC-2WLB
Product Code: 34292R
(For All Model Openers and all brands of garage door openers)
Description: Offers convenient, secure garage entry without using a remote control or key.
Model: KEP-1
Product Code: 34962R
Description: Mounts on wall to operate garage door from inside garage.
Model: GWB
Product Code: 34960-R
Emergency Release Kit
Description: An emergency release kit used to open the door from the outside in case of a power failure. The Emergency Release Kit is compatible with all brands of garage door openers.
Model: GER-2
Product Code: 35675-R
For more information on our
Genie Pro Garage Door Accessories
Please contact us.
RESIDENTIAL
COMMERCIAL
LiftMaster® Model T-5011
Industrial-Duty Trolley Operator for Standard Lift Sectional Doors
Model MT is a medium-duty trolley operator for standard lift sectional doors. It features a high-starting torque motor, a compact design, quicket-gliding rail spacers and a quick-mount swivel header bracket.
LOGIC 3.O TECHNOLGOY (L3)
Added Value
• Built-in 3-channel, 315MHz radio receiver accepts up to 23 Security+® or unlimited DIP switch remotes. 3-button remotes can be programmed for open/close/stop operation.
• Maintenance Alert System™ establishes a routine maintenance schedule based on the number of cycles or calendar date. Includes self-diagnostic system that allows you to troubleshoot up to eight different error codes.
• Timer-to-Close allows programming in 5-sec or 1-min increments. Commercial or industrial photo-eyes required.
• Thermal motor overload can be easily reset from the 3-button floor level control station
RELIABILITY & PROGRAMMING SIMPLICITY
•
Switchless motor eliminates stuck start switch and motor malfunctions on single-phase operators
• All high-voltage connections have been removed from the board for safety and ease of service
• Diagnostic LEDs speed installation and troubleshooting
• Motor direction jumper lets you change motor direction by simply moving a jumper
Available Plug-in Options for Logic 3.0 (L3)
AVAILABLE PLUG-IN OPTIONS FOR LOGIC 3.0 (L3)
•
Auxiliary Contact:
Used to operate security, warning, heating or other 5V to 240V devices. Features both normally open and closed contacts that actuate in conjunction with limit switches.
•
Warning Signal:
Red/green light module provides safety warning prior to close (when using timer-to-close feature). Also supports audio warning devices and includes down mid-stop feature.
•
CPS3 Option:
Enables the addition of a second set of photo-eyes or 2- or 4-wire, self-monitoring edge.
STANDARD FEATURES
Motor : Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Removable without affecting limit switch settings.
Drive Reduction : First-stage heavy-duty 5L V-belt; second-stage #41 chain; output on trolley #48 chain on 1/3 and 1/2 HP; #41 chain on 3/4 and 1 HP.
Emergency Disconnect : Spring-loaded for emergency manual operation.
Wiring Type : B2, C2, D1 and E2 wiring types are standard and easily set using a selector dial on the Logic 3.0 Control Board (L3). T and TS wiring can be activated with use of a CPS-L or CPS-LN4. Reversing Contactor Units (M) have C2 wiring standard and B2 available by simply moving a jumper wire. Operators are pre-wired to accept a sensing edge, photoelectric sensors, radio controls and most types of access control equipment. Failsafe wiring can be selected with use of a CPS-L, CPS-LN4 or failsafe edge and CPS3 card.
External Radio Control Terminal : Quick, convenient connections for retrofitting or adding radio controls on logic or mechanical operators.
Bearings : Ball bearings on output shaft; heavy-duty, oil-filled bushings on reduction shafts.
Brake : Solenoid-actuated brake is standard on 3/4 and 1 HP units to prevent coasting of door. Optional on 1/3 and 1/2 HP units.
Friction Clutch : Adjustable, helps protect against major damage to door and operator should the door meet an obstruction.
Construction : NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
Push Button Station : 3-button station comes standard and has open/close/stop functionality.
Quick-Mount Header Bracket : For fast, swing-up mounting.
Rail Assembly : High-strength dual L-rail track with nylon quiet-gliding chain guides on rail spacers for quiet, smooth operation.
Warranty
: 2-year warranty.
CONTROL ACCESSORIES
CPS® Commercial Protector System®: (recommended) A “non-contact” photo safety sensor designed to sense an obstruction and signal the door operator to reverse to open.
Sensing Edge
: (recommended) Designed to sense an obstruction and signal door operator to stop or reverse as desired. An electric or pneumatic sensing device can be added to bottom edge of door.
LiftMaster® Model J-5011
Industrial Duty Jackshaft Operator
Model J is an industrial-duty jackshaft operator. It features a removable hinged electrical box cover, a continuous-duty high-starting torque otor, industrial ball bearings on the ouput shaft and a universal mount frame design.
LOGIC 3.O TECHNOLGOY (L3)
Added Value
• Built-in 3-channel, 315MHz radio receiver accepts up to 23 Security+® or unlimited DIP switch remotes. 3-button remotes can be programmed for open/close/stop operation.
• Maintenance Alert System™ establishes a routine maintenance schedule based on the number of cycles or calendar date. Includes self-diagnostic system that allows you to troubleshoot up to eight different error codes.
• Timer-to-Close allows programming in 5-sec or 1-min increments. Commercial or industrial photo-eyes required.
• Thermal motor overload can be easily reset from the 3-button floor level control station
RELIABILITY & PROGRAMMING SIMPLICITY
•
Switchless motor eliminates stuck start switch and motor malfunctions on single-phase operators
• All high-voltage connections have been removed from the board for safety and ease of service
• Diagnostic LEDs speed installation and troubleshooting
• Motor direction jumper lets you change motor direction by simply moving a jumper
Available Plug-in Options for Logic 3.0 (L3)
AVAILABLE PLUG-IN OPTIONS FOR LOGIC 3.0 (L3)
•
Auxiliary Contact:
Used to operate security, warning, heating or other 5V to 240V devices. Features both normally open and closed contacts that actuate in conjunction with limit switches.
•
Warning Signal:
Red/green light module provides safety warning prior to close (when using timer-to-close feature). Also supports audio warning devices and includes down mid-stop feature.
•
CPS3 Option:
Enables the addition of a second set of photo-eyes or 2- or 4-wire, self-monitoring edge.
•
Mechanical Reversing Contactor Circuit (M):
(115V, 208/230V, 460V, 575V, 24V NEC Class 2 Circuit with 40VA transformer) Industrial linear contactor provides significantly longer control runs than conventional contactors.
STANDARD FEATURES
Motor : Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Removable without affecting limit switch settings.
Drive Reduction : First-stage heavy-duty 5L V-belt; second and third stages #48 chain; #50 drive chain.
Emergency Disconnect : Easy emergency manual operation using an electrically interlocked floor level disconnect.
Wiring Type : B2, C2, D1 and E2 wiring types are standard and easily set using a selector dial on the Logic 3.0 Control Board (L3). T and TS wiring can be activated with use of a CPS-L or CPS-LN4. Reversing Contactor Units (M) have C2 wiring standard and B2 available by simply moving a jumper wire. Operators are pre-wired to accept a sensing edge, photoelectric sensors, radio controls and most types of access control equipment. Failsafe wiring can be selected with use of a CPS-L, CPS-LN4 or failsafe edge and CPS3 card.
External Radio Control Terminal : Quick, convenient connections for retrofitting or adding radio controls on logic or mechanical operators.
Bearings : Industrial ball bearings on a 1" output shaft; heavy-duty oil-filled iron bearings on reduction shafts.
Friction Clutch : Adjustable, helps protect against major damage to door and operator should the door meet an obstruction.
Construction : NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
Push Button Station : 3-button station comes standard and has open/close/stop functionality.
Positive Locking Mechanical Brake System: Self-locking mechanical reduction system that functions as a holding brake.
Warranty
: 2-year warranty.
CONTROL ACCESSORIES
CPS® Commercial Protector System®: (recommended) A “non-contact” photo safety sensor designed to sense an obstruction and signal the door operator to reverse to open.
Sensing Edge
: (recommended) Designed to sense an obstruction and signal door operator to stop or reverse as desired. An electric or pneumatic sensing device can be added to bottom edge of door.
Emergency Egress Device:
Faceplate mounts flush on wall and contains pull handle to disconnect operator from grille. Allows the door to be opened manually or by spring tension.
Light-Duty Trolley Operator
Model ATS is an advanced trolley system light-duty trolley operator. It features an automatic safety reverse and door stop, a maximum run timer, a heavy-duty "I-beam" configured trolley track, an auto-reconnect trolley and meets requirements for both commercial and residential door operators.
Automatic Safety Reverse/Automatic Door Stop:
Reverses door automatically if obstructed when going down, stops if obstructed when going up.
The Protector System®:
Motor:
High-torque, industrial, 1/2 HP, 115V, single-phase motor with instant reverse and automatic reset thermal overload.
"I-Beam" Trolley Track:
Industrial-strength, heavy-duty steel "I-Beam" configuration for increased rigidity for 8', 10' and 12' door heights. Full #48 chain drive.
Push Button Station:
Momentary contact to open and close.
Manual Release with Auto-Reconnect Trolley:
Manual release in case of power failure. When power is restored, a push of the button automatically reconnects the door and operator.
Security Light:
Turns garage door opener lights on automatically when The Protector System beam is broken.
Equipped with PosiLock™:
When the garage door is down, it's securely locked. If an intruder tries to force the door open, the opener automatically reactivates to the closed position.
The ATS is equipped with a Security+® Rolling Code Receiver: With every activation, Security+ transmits a brand new code, one of over 100 billion codes, never to be repeated. The ATS Security+ operator can accommodate up to eight Security+ remote controls as well as one Security+ Keyless Entry System. Ideal for multiple drivers. (Remote controls are not included.)
Warranty:
1-year warranty.
LiftMaster offers optional Remote Controls and Keyless Entry System with Security+ Anti-Burglary Coding.
Please contact us concerning our selection of LiftMaster Garage Door Opener Controls and Accessories.
IntelliG™ 1000
3 Button Transmitter
(For Intellicode® Products Only)
Description: 3 Button Remote Control
with
Intellicode
®
1 & 2
Model: G3T-BX
Product Code: 037218T
3 Button Transmitter
(For Intellicode® Products Only)
Description: 3 Button Remote Control
with
Intellicode
®
1
Model: GITR-3
Product Code: 37517S
The IntelliG™ 1000 provides intelligent design for the homeowner that wants quiet performance with superior design and conveniences that fit their busy lifestyle.
The ReliaG 800 provides power, value and reliability for those who desire a powerful, quiet, long-lasting opener.
ReliaG 800
®
Special Features
A powerful
½
HPc
**
Power Plus DC motor that offers quiet and smooth operation.
Operates residential sectional doors up to 500 lbs. and eight feet high.
Two-light system for maximum 120 watts provides plenty of illumination.
Wall console and 3-button remote included.
Opening speed up to 7.0 inches/second with belt drive. Chain drive also available.
Soft start/stop means less wear and tear on the door system
10-year limited motor warranty †
Belt or Chain Drive *
½ HPc ** Power Plus
10 Year Motor Warranty †
(2) 60 watt bulbs
Opening speed: 7.0 in/sec ***
* Belt or Chain Drive for sectional doors up to 8 ft. in height and 500 lbs. in weight
** ½ Horsepower Comparable (HPc) designates that this garage door opener meets Genie's lifting force specification for 1 horsepower garage door openers.
*** Maximum opening speed +/- 0.5 in/sec.
